Skip to content

Activate Lane Assist for New 2Q0 Cameras

Modul "A5 Front Sensor" → Long coding

  • "ACC" →  Coded (if equipped)
  • "Point_of_Intervention" →  "early_setting_over_menu"
  • "Configuration_for_lane_departure_warning_kl15" →  "Last_setting"
  • "Lane_Assist_system_mode" →  "Selection_over_menu"
  • "HC" →  Coded
  • "HC_messages" →  Coded
  • "HC_Warning_intensity" →  "Seting_over_Menu"
  • " HC_Variante" →  "Variante_1"

Modul "5F Information Electr." → Adaptation :

  • "Car_Function_List_BAP_Gen2" → "LDW_HCA_0x19" →   "activated"
  • "Car_Function_List_BAP_Gen2" → "LDW_HCA_0x19_msg_bus" →   "Databus Extended"
  • "Car_Function_Adaptations_Gen2" → "menu_display_Lane_Departure_Warning" →  "activated"
  • "Car_Function_Adaptations_Gen2" → "menu_display_Lane_Departure_Warning_over_threshold_high" →   "activated"
  • "Car_Function_Adaptations_Gen2" → "menu_display_Lane_assistant" → "activated"
  • "Car_Function_Adaptations_Gen2" → "menu_display_Lane_assistant_over_threshold_high" → "activated"

Modul "17 Instruments" → Long Coding → HEX:

  • Byte 04 → Bit 6 activated("Spurhalteassistent / Lane Assist verbaut")
  • Byte 11 → Bit 1 activated ("Spurhalteassistent / Lane Assist Information (BAP) verbaut/aktiv")

Control unit 44 → Long Coding → HEX:

  • Byte 03 → Bit 0 activated ("Spurhalteassistent verbaut")

\