Telnet connection

==IMPORTANT!== ==Do not install this on devices without navigation, otherwise you will get a cyclic reboot in update mode.==

Unpack MSTD_Audi_NAV_Telnet to FAT32 formatted SD and install like a firmware update.

Tested on MSTD_EU_AU_P3151 navi unit.

:::info If you want to install it with MSTD_SE/SK/VW navi units, just add variants at the end of the metainfo2.txt

ax88178 USB2Ethernet adapter with VID_2001/PID_3C05 (Dlink DUB-E100 rev.B) can be used.

:::

MSTD_Audi_NAV_Telnet.zip 1948

Reference: https://www.digital-eliteboard.com/threads/audi-a3-mib-s-supportthread-mib1-mstd.432868/post-4160763

Unlock Expert Boot Mode

:::info Expert Boot Mode enables special boot menu in UART console on quadlock, where you can enable/disable loading of different drivers (keyboard/usb ethernet).

:::

To enable Expert Boot Mode enter in telnet:

\MMC\TOOLS\SetBootMenu -w E

Now you can connect via TTL adapter to quadlock and in UART console can do following:

U + Enter enable/disable keyboard support
D + Enter enable/disable UBS ethernet adapter support
0 + Enter enable/disable Expert Boot Mode
1 + Enter enable/disable booting from snapshot image